Cookie Img

Flow Meter

ViewView
  1. Effluent Water Flow Meter

    This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.
    Send Inquiry
  2. Effluent Water Flow Meters

    FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.
    Send Inquiry
  3. Magnetic RotaMeters

    Metal Tube Rotameters is basically a variable area flowmeter. The differential pressure across the annulus area is constant and the flow rate is measured as a function of the position of annulus area created by float position. The position of the float is sensed by a magnet and indicated on the dial in terms of flow rate. These are in accordance with the set industry standards.
    Send Inquiry
  4. Digital Water Flow Meter

    FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity density of the flowing liquid.
    Send Inquiry
  5. BY-Pass Rotameters

    DESCRIPTION:BY PASS Rotameter for Chemical process Indusrtries Flowtech Make By-Pass Rotameters.Make Bypass Rotameter as designed for measurement of flow rate of Liquid and gases in 2 NB or higher Size pipe sine.“Flowtech” Make By- pass Rotameter as designed for measurement of flow rate of Liquid and gases in 2” NB or higher Size pipe sine. The complete assembly consist of carrier rings [orifice Flanges], orifice Plate, by-pass piping with Isolation valves & a Rotameter as indicator. The orifice plate is design on IS of BS specification.These meters are selected for low cost measurement of high flow rates generally in the 2” and larger sizes. It provides linear measurements of fluid in conjunction with an orifice plate in the main line. The Rotameter is modified to include a range orifice which is sized so that the flow through the meter at the maximum pressure drops across the orifice plate in necessary to lift the float to the maximum position. Hence the flow through the range orifice is proportional to the instantaneous flow through the main orifice and so the bypass Rotameter measure main line flow.Suitable for larger pipeline of 50 NB to 450 NB.The Flowrate through the Rotameters is proportional to the pressure drop across the orifice plate.High & Low flow Switches on request.
    Send Inquiry
  6. Turbine Flow Meter

    Turbine flow meters are employed for both lower viscosity gases and liquids with turn down ratios from 7 to 30:1. The use of an appropriate zero drag electronic pick off in place of the standard magnetic tape is the reason behind achieving this extended range. The turbine experiences too much extra drag at low fluid velocities due to the standard magnetic tape. As a result, the rotational speed is slowed down.FLOWTECH is a pioneer in the manufacturing of Turbine Flow Meter since last 18 years and known for its high reliability and repeatable measurements under the most demanding conditions. Turbine flow meters by flowtech are IS certified and are quality assured.
    Send Inquiry
  7. Diesel Flow Meter

    Diesel flow meter is a device to measure linear, nonlinear, mass or wide flow rate and volume flow of low viscosity fluid in the closed pipeline. The meter is commonly used in oil, chemical, metal, aviation, scientific research and others. While choosing flow meters, user should consider these intangible factors as familiarity of plant.
    Send Inquiry
  8. Glass Tube RotaMeters

    FLOWTECH Chemical Rotameters are intended for general in line and By-Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.
    Send Inquiry
  9. Metal Tube RotaMeter

    Metal Tube Rotameters is basically a variable area flowmeter. The differential pressure across the annulus area is constant and the flow rate is measured as a function of the position of annulus area created by float position. The position of the float is sensed by a magnet and indicated on the dial in terms of flow rate. These are in accordance with the set industry standards.
    Send Inquiry
  10. Acrylic Body RotaMeter

    FLOWTECH Acrylic Body Tube Variable Area Flow Meters (Rotameters) are intended for general in line metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Acrylic Body metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered Acrylic body Tube with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.Product Details:Meter Size Max. Operating Pressure (Kg/Cm2g)15 25 20 25 25 15 40 12 50 10 80 7 Precociously machined from imported transparent solid acrylic block tapering tube is done by special tools.Suitable for water, saline water, air N2 H2 and natural gases.Available from 15 NB to 100 NB pipe size and ranges between 30 to 40,000 LPH of water at ambient temperature.Accuracy=2%FSD.High & Low Flow switches on request.
    Send Inquiry
  11. Orifice Plates & Flange Assembles

    Flowtech make Orifice Plates and Flange Assembly are used for measuring flow of various Liquids, Gases & Steam from 1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.Flowtech Make Orifice Plates & Flange Assemblies.Suitable for creating differential pressure in a pipe line for flow transmitter etc.Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.Available in SS-316/ P.P. Material.Design standard confirm to BS 1042 Design Standards Design - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167 Orifice Bo re - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3 VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
    Send Inquiry
  12. Mag Flow Meter

    FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.Working Principle This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.
    Send Inquiry
Contact Us

900/2/B, GIDC Estate, Makarpura, Vadodara, Gujarat, 390010, India
Phone :+917259290657